GRANDIOSO P1 Super Audio CD / CD Transport
To create a moving, once-in-a-lifetime connection between music and a listener, the vitality of the music needs to be conveyed in its purest form, without stress. That is the ultimate mission of top-quality audio. ESOTERIC’ s P1 and D1 digital source systems combine remarkable new technologies such as ES-LINK4 and 36-bit D/A processing. It’ s easy to see why these new flagship models are called Grandioso, Italian for “magnificent” or “majestic” .
ESOTERIC has developed an original, state-of-the -art transmission format called ES-LINK4, which allows DSD and 352.8kHz/48bit PCM ultrawideband digital transmission using an HDMI cable. ES-LINK4 performs a large part of the digital signal processing on the sending side, greatly reducing the digital signal processing load on the D/A converter. In addition to ultra-wide bandwidth, we sought high sound quality through our “Pure D/A” concept, in which the D/A converter specializes in its original function of D/A conversion processing.
The D1 applies a 36-bit D/A processing algorithm that converts PCM signals to analog signals at a high resolution of 36 bits by combining several 32-bit DAC devices. The tone of the high-bit data is used for faithful analog conversion. The resolution of 32-bit encoding is 256 times higher than that of 24-bit encoding, and 36-bit encoding gives an amazing resolution level that is another 16 times higher – a total of 4,096 times higher than the resolution of 24-bit encoding. Producing even finer bit tones minimizes operational error for outstanding expression of even subtle music signals.
The clock circuit, which supplies highly accurate reference clock signals to a digital circuit, can be considered the core unit of a digital player. The clock circuit of the P1 and D1 is completely independent of other circuits, including its power source and ground, enabling pure clock signals to be supplied to the system. The voltage controlled crystal oscillator (VCXO) was developed especially for the P1 and D1 in a joint effort with Nihon Dempa Kogyo (NDK), a major manufacturer of crystal oscillators. For a high-precision custom clock device worthy of leading models, high sound quality playback is provided thanks to an extremely low level of phase noise and a crystal element that is even larger than before.
ESOTERIC is justifiably proud of this VRDS-NEO transport mechanism. Remarkable improvements in readout accuracy have been achieved by utilizing a high-precision turntable and correcting the disc surface shake occurring during disc rotation. The P1 features the VMK-3.5-20S VRDS-NEO with a refined drive circuit design. A pair of selected ball bearings is used in the spindle shaft bearing assembly, and there is a micron-level accuracy duralumin turntable with a 20 mm-thick steel turntable bridge for a total mass of 5.2 kg. In addition, the highly trusted mechanism of the P1 has been further refined with a high-magnetic-flux-density magnet-driven coreless three-phase brushless spindle motor, thread feed control (which evolved from the concept of the premier P-0 series), and a sliding-shaft-structure pickup that ensures that the laser beam is always at a right angle to the disc.
The P1 uses the VS-DD dedicated spindle servo driver to drive the spindle motor that functions as the core unit of the VRDS-NEO mechanism. Using a three-channel discrete amplifier circuit to optimize the current waveform supplied to the motors, the VS-DD suppresses vibrations, enabling smooth spindle drive operation and highly precise servo control. The dedicated toroidal power supply unit is mounted in a separate power supply unit housing, enhancing noise isolation effects.
*VS-DD=VRDS Spindle Discrete Driver
Two-chassis structure for main unit and power supply unit
Following the concept employed in our trademark P-0 series, a two-chassis structure is used in the traditional ESOTERIC flagship model. The power supply unit has been expanded to full-size, making it possible to include even more extravagant power supply circuits. A total of four independent toroidal power transformers are installed to supply clean and stable DC power to each circuit (VS-DD circuit, drive mechanism drive circuit, digital output circuit, and clock circuit).
The inside of the main unit chassis has a double-deck structure and 3D optimized chassis construction connecting each circuit block with the shortest signal paths. Thick aluminum materials are used for the exterior, and the 5 mm-thick steel bottom chassis is supported at four points on original ESOTERIC pinpoint feet. Vibration is effectively controlled and thorough measures have been taken for rigidity.
Various digital output terminals
Made of aluminum with just the right heft, the remote control has a leather finish that is supple and comfortable in your hand.
|Compatible disc types|
|Playback||Super Audio CD, CD (including CD-R and CD-RW)|
|Digital Audio Output|
|ES-LINK output||x 2|
|XLR output||x 2 (Use 2 terminals for Dual AES output)|
|i.LINK (AUDIO) output (6-pin)||x 1|
|i.LINK (AUDIO) output (4-pin)||x 1|
|RCA output||x 1|
|Clock Sync Input Format|
|Connector||BNC x 2|
|Supported input frequencies (±10ppm)||44.1 kHz,88.2 kHz,176.4 kHz,10 MHz,22.5792 MHz|
|Input impedance||IN: 75 Ohms
10MHz IN: 50 Ohms
|Input level||IN: TTL levels
10MHz IN: Sine wave: 0.5 to 1.0 Vrms
|Power supply||AC 230V, 50Hz
AC 120V, 60Hz
AC 220V, 60Hz
(W x H x D, including protrusions)
445 mm x 162 mm x 448 mm
(17 1/2″ x 6 3/8″ x 17 5/8″)
Power supply unit:
445 mm x 132 mm x 452 mm
(17 1/2″ x 5 1/4″ x 17 3/4″)
27 kg (59 1/2 lbs)
Power supply unit:
24 kg (53 lbs)
|Remote control unit (RC-1156) x 1, Batteries (AA) x 2, HDMI cable x 1, Power cord set x 1, Felt pads x 4, Owner’s manual x 1, Warranty card x 1|