G-02X Master Clock Generator
The G-02X master clock generator adopts new technologies such as “Wide Range Clock Buffer Amplifiers”, “Adaptive Zero Ground” circuits, and a new custom made high-precision OCXO to attain the very best in musical expression from your digital audio system.
A ‘clock’ is a pulse signal that is used as a reference
signal for all digital circuits. Every piece of digital gear has an on-board clock oscillator, and a high-quality clock is vital for precise, jitter-free signal processing. The G-02X is an external clock device designed to supply ultrahigh precision clock to digital devices (such as a transport, DAC, SACD player, or network audio player) equipped with dedicated input terminals. The G-02X can supply clock signals with a significantly higher degree of purity and stability than clocks generated by connected devices themselves, and thereby significantly improves the sound quality.
Ultrahigh Precision OCXO
The core of the unit features a custom OCXO (Oven Controlled Crystal Oscillator) newly developed by ESOTERIC that is comprised of an oven that maintains a constant internal temperature, a crystal oscillator, and an oscillating circuit. This OCXO was designed for high audio quality based on the wisdom of the Grandioso series to provide an excellent center frequency precision (±0.01 ppm Typ), and reduces phase noise by approximately 3 dB* compared to previous model. *Measured at an offset frequency of 100 Hz
“Wide Range Clock Buffer Amplifier”
The unit adopts the “Wide Range Clock Buffer Amplifiers” developed for the Grandioso G1. These discrete circuits utilize high-speed transistors with excellent performance at high frequencies and are separated for each output terminal to contribute to improved sound quality.
“Adaptive Zero Ground” Mode
The G-02X has the “Adaptive Zero Ground” circuitry inherited from the Grandioso G1 between the internal OCXO and the buffer amplifiers. The “Adaptive Zero Ground” mode actively drives the ground signal to 0 volts and greatly reduces noise (random jitter) caused by variation in the ground voltage. The user can select between the adaptive mode and the normal mode, for different sound characteristics according to their listening preferences.
Substantial Power Supply
A newly-designed power supply is adopted to maximize the performance of the new “Wide Range Clock Buffer Amplifiers” , with the amplifier and power supply divided into blocks to ensure drive that is both clean and powerful. A toroidal transformer is used as the main transformer and a dedicated El core transformer is used for control. A series of multiple capacitors are used for the ripple filter circuit and Schottky barrier diodes are used for quick response to support fast digital processing.
The G-02X can supply a clock signal to a maximum of eight devices. Output can be switched ON and OFF for each terminal. The unit has four 10 MHz sine wave clock output terminals. The other four output terminals (A x 2 and B x 2) enable clock signals to be output at 100 kHz, 10 MHz (square wave), and the basic frequency of 44.1 kHz/48 kHz, up to a maximum frequency of 22.5792 MHz/24.576 MHz, and separate output frequencies can be set for each terminal.
External 10 MHz Input for External Clocks
Milled Brass Gold Plated BNC Terminals
Preheat Function for Internal OCXO
Organic EL Display
|44.1 kHz setting||44.1, 88.2, 176.4, 352.8, 705.6 kHz, 1.4112, 2.8224, 5.6448, 11.2896, 22.5792 MHz|
|48 kHz setting||48, 96, 192, 384, 768 kHz 1.536, 3.072, 6.144, 12.288, 24.576 MHz|
|Both settings||100 kHz, 10 MHz|
|Output level||Rectangular wave: TTL level / 75 Ohm|
|Output level||Sine wave : 0.5 ± 0.1 Vrms / 50 Ohm|
|Standard frequency input (EXT IN)|
|Input frequency||10MHz (within ±10ppm)|
|Input levels||Sine wave: 0.5-1.0 Vrms/50 Ohm,
Square wave: TTL level/10k Ohm
Positive pulse: TTL level/10 kOhm
|OCXO (Chrystal oscillator)|
|Until oscillator stabilizes
after power turned on
|Frequency stability||Within ±0.015 ppm (0°C to 70°C)|
|Frequency precision||±0.01 ppm Typ (When shipped new)(ppm = 10^−6 )|
|Power supply||AC 230V, 50Hz
AC 120V, 60Hz
AC 220V, 60Hz
(W x H x D, including protrusions)
|445 × 107 × 359 mm
(14 5/8” × 4 1/4” × 14 1/4”)
|Weight||11.3 kg (25 lb)|
|Power cord ×1; Felt pads ×3; Owner’s manual ×1; Warranty card ×1|